服务热线:

13708015486

当前位置:首页 > 产品中心
  • 产品名称: HY型卧式单级活塞推料离心机
  • 所属类别: 活塞推料离心机
  • 应用领域: 适用于如碳铵、硫铵、氯化铵、食盐、芒硝(元明粉)、硝化棉、碳酸一铵、磷酸二甲酯、无机盐等数百余种物料的分离。

■产品结构原理

  本机主要由机壳、进料装置、转鼓、筛网、推料装置、机座、轴承座组台、电机、油泵、冷却器等零件部组成。物料分离、干燥在转鼓内进行,油泵输出的压力油使推料机构往复运动,冷却器置于油箱内,使压力油得到很好的冷却。机壳轴承座组合电机等固定联接在机座上,使整机结构十分紧凑.

  悬浮液在离心机全速运转后通过进料管进入布料斗,在离心力的作用下,悬浮液沿圆周均匀地甩到转鼓内的筛网上,液相经筛网间隙与转鼓过滤孔及中机壳上的排液口泄出,而固相则截留在筛网上形成圆筒状滤渣层,通过推料装置的往复运动,滤渣层沿转鼓轴向向前移动排出转鼓体,由前机壳上的卸抖口卸出。

■Product structure principle

This machine is mainly consists of chassis. feeding device. drum, screen mesh, pushing device. frame, bearing combination, motor, pump, cooler, etc Material separation, drying in the drum, the pump output pressure oil to push institution reciprocating movement. on the tank, cooler cools the pressure oil well. Chassis. bearing combination. motor and other fixed connection on the stand. so the structure is very compact

Suspension after centrifuge run at full speed through the feeding tube into the fabric. in under the action of centrifugal force. the suspension along the circumference of a circle to evenly inside the drum sieve. liquid phase by the mesh clearance and drum filter hole and drainage hole on the casing in the emission; While the solid phase intercept in residue in cylinder shape layer is formed on the screen, through the reciprocating movement of lhe pushing device, filter cake layer along the axial moving forward drum drum eduction body, by the former discharging mouth discharge on the chassis

■产品特点与用途

  本机为HY卧式单级活塞推料、连续操作的过滤式离心机。可以在全速运转下完成进料、分离、洗涤、干燥、卸料等所有操作工序。

  该机具有自动、工作连续、产量大、单位产量能耗低、对固相晶料破坏小、运转平稳、耐腐蚀强、操作维护简便等特点.适用于分离过滤性能较好的含颗粒结晶或纤维状物料的悬浮液,其固相物的平均粒度0.2-3毫米,浓度(体积比)40-60%,操作温度小于loo'c/J直.适用于如碳铵、硫铵、氯化铵、食盐、芒硝(元明粉)、硝化棉、磷酸一铵、磷酸二甲脂无机盐等数百余种物料的分离.

■Product characteristics and USES

This machine is HY horizontal single stage piston push materials continuous operation of filtering centrifuge. Can run at full speed of finish feeding, sepa rating, washing, drying, unloading, etc. All operating process The machine has automatic, continuous work, large output, low energy consumption per unit of production, small damage to solid-phase crysta material, smooth operation, strong corrosion resistance, easy operation and maintenance etc. Is suitable for the separation and filtration performance good crystallization or fibrous materials including particle suspension. The solid content of the average particle size of 0.2 - 3 mm, 40 - 60% concentration (volume ratio), the operating temperature is less than lOO oC advisable. Applicable to such as producyion. ammonium sulphate ammonium chloride, salt, glauber's salt (sodium sulphate). nitrocellulose monoammonium phosphate. dimethyl phosphate and inorganic salt more than hundreds kinds of materials such as sepa ration

■结构示意图 Structure diagram

■主要技术参数 The main technical parameters

■特别提示

  1、技术参数以产品说明书为准。

  2、洽询时,请顾客详细赐告物料特性参数及工况条件要求。

  3、根据顾客的特殊需要,我们可以采取个性化的设计与制造:

  (1)材质物料接触部分材质可为304、316L、2205、2507、904L. TA2等。

  (2)电机型式可采用普通型或防爆型电机等。

  (3)排液方式:母液与涤液可采取混合排放或分流排放。

  (4)滤网间隙宽度选择范围:0 08—0.40mm。

  (5)可商定其他技术要求。

■Special note

1,The technical parameters of product specification shall pervail.

2,inquire, please cunstomer details given to the material charaticeristics patameters and working condition requirements.

3,according to the special needs of customers, we can take the personalized design and manufacturing:

(1) material: material conract part of the material for 304, 316 |, 2205, 316, 904 |, TA2, etc.

(2) motor type: can use ordinary or explotion-proof motor,etc.

(3) drainage way: mother liquor blended With polyester liquid can adopt emissions or bypass emissions.

(4) mesh gap width range: 0.08 to 0.40 mm

(5) can be agreed Other technical requirements

产品中心
联系我们

全国统一销售热线

(杨经理)

13708015486

微信号:13708015486

联系方式

地址:成都市青白江区工业园创新路516号

传真:028-89320122

网站:www.gaofenlxj.com

邮箱:gaofen028@126.com

关注官方微信

  • 成都市青白江区工业园创新路516号
  • 13708015486
  • 028-8932-0122
  • gaofen028@126.com

手机官网

扫一扫,关注微信

浏览手机官网