服务热线:

13708015486

当前位置:首页 > 产品中心
  • 产品名称: GKH卧式虹吸刮刀卸料离心机
  • 所属类别: 卧式刮刀离心机
  • 应用领域: 化工、化肥、食品、制药等行业

■产品结构原理

  本系列离心机主要由刮刀组件、门盖组件。回转体组件、虹吸管组件、机座壳体组件、传动系统及液压系统等组成。

  转鼓包括内转鼓(过滤转鼓)和外转鼓(虹吸转鼓)。内转鼓沿圆周开有许多过滤槽,沿轴向均布有许多加强筋,通过相邻两块之间的压块及螺栓与外转鼓联为一体,使内、外转鼓之间形成轴向流体通道。内转鼓内铺设衬网和滤布,滤布两头用O型橡胶条压紧;外转鼓壁上不开孔,外转鼓的转鼓底上对称有斜孔,作为转鼓与虹吸室间的流体通道。整个回转体组件悬臂支承在主轴承上。主轴后端的三角皮带轮,通过三角胶带与主电机上的皮带轮相连。当启动主电机时,就会带动主轴回转体组件运动。轴承箱除支承主轴回转体组件外,其大背板上部通过法兰连接安装有虹吸管组件和反冲管;大背板外圆端面上通过螺栓与机壳相连,门盖上装有刮刀组件。

  机器全速运转后,由反冲管向虹吸室内灌水(液体),流体经虹吸室与转鼓的通道压入转鼓,除排去内、外转鼓间空气外,还在过滤介质上形成一液体层,然后开始进料,同时虹吸管旋到某一位置,一定时间后再旋到指定位置,进料结束后虹吸管旋到最低位置。悬浮液进入转鼓后,由于过滤介质上液体层的作用,能使物料均匀分布在过滤介质上,液相在离心力和虹吸抽力的双重作用下快速穿过过滤介质和内转鼓上的过滤孔进入内外转鼓之间的通道,然后经转鼓底上的斜孔进入到虹吸室,由虹吸管排除。而固相则截留在过滤介质上形成滤渣层,经一定时间分离后,旋转刮刀将其刮下,通过斜槽或螺旋卸料机构排除机外。

■Scope of application

The series of centrifuge is mainly composed of scraper components, door cover components. Revolving body components, components, siphon frame shell components, transmission system and hydraulic system, etc.

Drum including dantian drum filter (drum) and outer (siphon drum). Dantian drum along the circumference of a circle to open many filter tank, along the axial uniform has a lot of stiffener, through the pressure between two adjacent blocks and bolts and outer drum etc, formed between the inner and outer drum axial flow channel. Dantian laid inside the drum line network and filter cloth, filter cloth with both ends O rubber strip compression; The outer drum wall doesn't open hole, the outer drum drum bottom symmetrical with inclined hole, as fluid passage between the drum and siphon room. The whole of rotors cantilever support on the main bearing components. Spindle backend v-belt pulley, through triangle tape is connected to a pulley on the main motor. When to start the main motor will drive the spindle axisymmetrical component movement. Bearing box besides bearing spindle revolving body component, its big upper back through the flange connection components with siphon and recoil tube; A back end on the cylindrical through bolts are connected to the chassis, door cover is equipped with scraper components.

Machine running at full speed, the recoil tube to siphon indoor water (liquid), fluid by siphon chamber and pressure into the drum drum track, in addition to the row between the inner and outer drum air, also in a liquid layer is formed on the filter medium, and then begin to feed, siphon spin to a position at the same time, the spin again after a certain time to the designated location, after the feed syphon spin to the lowest position. After suspension into the drum, because the role of the liquid layer filter medium, the uniform distribution on the filter medium, can make the material liquid under the action of centrifugal force and siphon draught fast through the filter medium and converted on the drum filter hole into the passage between the inner and outer drum, and then by the drum inclined hole on the bottom into the siphon room, by the siphon ruled out. While the solid phase intercept in filter cake layer is formed on the filter medium, after a certain time separation, rotating scraper scraping, through the chute or spiral discharging institutions exclude closed.

■主要技术参数 The main technical parameters

■工作原理 working principle

■特别提示

  1、技术参数以产品说明书为准。

  2、洽询时,请顾客详细赐告物料特性参数及工况条件要求。

  3、根据顾客的特殊需要,我们可以采取个性化的设计与制造:

  (1)材质:物料接触部分材质可为304、316L、2205、2507、904L、TA2等(也可采用衬包结构)。

  (2)电机型式:可采用普通型或防爆型电机等。

  (3)排液方式:母液与涤液可采取混合排放或分流排放。

  (4)可采用梭槽卸料结构。

  (5)可商定其他技术要求。

■Special note

1, the technical parameters of the product specification shall prevail.

2, inquire, please customer details given to the material characteristic parameters and working condition requirements.

3, according to the special needs of customers, we can take the personalized design and manufacturing:

(1) material: material contact part of the material for 304, 316 l, 2205, 2507, 904 l, TA2 (also can use line package structure).

(2) motor type: can use ordinary or explosion-proof motor, etc.

(3) drainage way: mother liquor blended with polyester liquid can adopt emissions or bypass emissions.

(4) can use shuttle tank discharging structure.

(5) can be agreed other technical requirements.

产品中心
联系我们

全国统一销售热线

(杨经理)

13708015486

微信号:13708015486

联系方式

地址:成都市青白江区工业园创新路516号

传真:028-89320122

网站:www.gaofenlxj.com

邮箱:gaofen028@126.com

关注官方微信

  • 成都市青白江区工业园创新路516号
  • 13708015486
  • 028-8932-0122
  • gaofen028@126.com

手机官网

扫一扫,关注微信

浏览手机官网